Sony DSX-M80 Operating Instructions - Page 19

Installation, Installing the microphone, Removing the trim ring and the, mounting sleeve

Page 19 highlights

Installing the microphone To capture your voice during handsfree calling, you need to install the microphone .    Clip (not supplied) Cautions • It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations. • If any other shock-absorbing equipment is in your boat, contact the store where you purchased this unit, or the boat dealer, before installation. Notes • When mounting on the dashboard, remove the visor clip carefully from the microphone , then attach the flat-mount base  to the microphone . • Before attaching the double-sided tape  clean the surface of the dashboard with a dry cloth. Installation Removing the trim ring and the mounting sleeve Before installing the unit, remove the trim ring  and the mounting sleeve  from the unit. 1 Pinch both edges of the trim ring , then pull it out.  2 Insert both release keys  until they click, and pull down the mounting sleeve , then pull up the unit to separate.   Face the hook inwards.  19GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

19
GB
To capture your voice during handsfree
calling, you need to install the microphone
.
Cautions
• It is extremely dangerous if the cord
becomes wound around the steering
column or gearstick. Be sure to keep it and
other parts from interfering with your
driving operations.
• If any other shock-absorbing equipment is
in your boat, contact the store where you
purchased this unit, or the boat dealer,
before installation.
Notes
• When mounting on the dashboard, remove the
visor clip carefully from the microphone
, then
attach the flat-mount base
to the microphone
.
• Before attaching the double-sided tape
clean
the surface of the dashboard with a dry cloth.
Installation
Before installing the unit, remove the trim
ring
and the mounting sleeve
from the
unit.
1
Pinch both edges of the trim ring
,
then pull it out.
2
Insert both release keys
until they
click, and pull down the mounting
sleeve
, then pull up the unit to
separate.
Installing the microphone
Clip (not supplied)
Removing the trim ring and the
mounting sleeve
Face the hook inwards.