Sony DSX-M80 Help Guide - Page 61

Item LPF SLOPE (low pass filter slope) Detail Selects the LPF slope: [1], [2], [3]. SUBWOOFER (subwoofer) Item Detail SUBW LEVEL (subwoofer level) Adjusts the subwoofer volume level: [+10 dB] - [0 dB] - [-10 dB]. ([MUTE] is displayed at the lowest setting.) SUBW PHASE (subwoofer phase) Selects the subwoofer phase: [NORMAL], [REVERSE]. SUBW POS (subwoofer position) Selects the subwoofer position: [NEAR], [NORMAL], [FAR]. (Available only when [F/R POSITION] is not set to [OFF].) LPF FREQ (low pass filter frequency) Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOPE (low pass filter slope) Selects the LPF slope: [1], [2], [3]. HPF (high pass filter) Item HPF FREQ (high pass filter frequency) HPF SLOPE (high pass filter slope) Detail Selects the front/rear speaker cut-off frequency: [OFF], [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. Selects the HPF slope (effective only when [HPF FREQ] is set to other than [OFF]): [1], [2], [3]. AUX VOLUME (AUX volume) Adjusts the volume level for each connected auxiliary device: [+18 dB] - [0 dB] - [-8 dB]. This setting negates the need to adjust the volume level between sources. (Available only when the AUX is selected.) BT AUDIO VOL (BLUETOOTH audio volume) Adjusts the volume level for each connected BLUETOOTH device: [+6 dB] - [0 dB] - [-6 dB]. This setting negates the need to adjust the volume level between sources. (Available only when the BT audio, application or Pandora® is selected.) MAX VOLUME (maximum volume) Sets the maximum volume level of the unit: [30] - [50]. 61