Sony DVP-CX860 Operating Instructions - Page 77
Sound, Operation, VIDEO CD or a CD.
UPC - 027242579033
View all Sony DVP-CX860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Additional Information Sound There is no sound. , Check that the player is connected securely. , The audio connecting cord is damaged. Replace it with a new one. , Make sure you connect the player to the audio input connectors on the receiver (amplifier). (page 10) , Make sure you turn on the TV and the receiver (amplifier). , Make sure you select the appropriate input on the receiver (amplifier) so that you can listen to the sound from the player. , The player is in pause mode or in Slow-motion Play mode. Press H to return to normal play mode. , The player is in fast forward or fast reverse mode. Press H to return to normal play mode. , If you use the DIGITAL OUT connectors, set "DIGITAL OUT" to "ON" in the setup display. Otherwise no sound will come from the DIGITAL OUT connectors. (page 70) , You selected a VES mode other than "OFF" in the Control Menu display when you connected the component via the DIGITAL OUT OPTICAL or COAXIAL connector. Set "VES" to "OFF" in the Control Menu display. (page 47) , When you play DTS sound tracks, sound will only come out from the DIGITAL OUT OPTICAL or COAXIAL connector. (page 20) Sound is noisy. , Clean the disc. , When you play a CD with DTS sound tracks, noise will come from any connector other than the DIGITAL OUT OPTICAL or COAXIAL connector. (page 20) Sound distortion occurs. , In the setup display, set "AUDIO ATT" in "AUDIO SETUP" to "ON." (page 70) The sound loses its stereo effect when you play a VIDEO CD or a CD. , Set "AUDIO" to "STEREO" in the Control Menu display. (page 43) , Make sure you connect the player correctly. (pages 8, 10, 12) The surround effect is difficult to hear when you are playing a Dolby Digital or DTS sound track. , Depending on the DVD, the output signal may not be the entire 5.1 channels. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or DTS format. Operation The remote does not function. , Remove any obstacles between the remote and the player. , Use the remote near the player. , Point the remote at the remote sensor on the player. , Replace all of the batteries in the remote with new ones if they are weak. , The TV/DISC EXPLORER/DVD switch is not in the correct position. The disc does not play. , There is no disc inside ("Insert disc." appears on the TV screen). Insert a disc. , Insert the disc correctly with the playback side facing left into the disc slot. , Clean the disc. , The player cannot play CD-ROMs, etc. (page 5) Insert a DVD, a VIDEO CD, or a CD. , Check the region code of the DVD. (page 4) , Moisture has condensed inside the player. Remove the disc and leave the player turned on for about half an hour. (page 6) , The selected disc is not included in the current folder. The player does not play from the beginning when playing a disc. , Program Play, Shuffle Play, Repeat Play or A-B Repeat Play has been selected. Press CLEAR. (pages 52 through 57) , Resume Play has been selected. Press x on the front panel or on the remote before you start playing. (page 23) , A title menu or a DVD menu automatically appears on the TV screen when you play your DVD, or a setup display automatically appears on the TV screen when you play your VIDEO CD with PBC functions. 77