Sony DVP-FX700 Operating Instructions - Page 65

Before Calling Service Personnel (continued) Symptom No sound. Cause • The equipment connected with the audio cable is not set to receive DVD signal output. • The audio cables are not connected securely. • The power of the equipment connected with the audio cable is turned off. • The Digital Audio Output is set to the wrong position. The playback picture is poor. • The disc is dirty. The DVD player does • No disc is inserted. not start playback. • An unplayable disc is inserted. • The disc is placed upside down. • The disc is not placed within the guide. • A menu is on the LCD screen. • The Rating level is set. Correction • Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. • Connect the audio cable into the jacks securely. • Turn on the equipment connected with the audio cable. • Set the Digital Audio Output to the correct position, then turn on the DVD player again. • Clean the disc. • Insert a disc. (Check that the disc indicator in the display window is lit.) • Insert a playable disc. (Check the disc type, color system and Regional code.) • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • Press the SET UP button to turn off the menu screen. • Cancel the Rating function or change the rating level. Reference 65