Sony DVP-NC615S Operating Instructions - Page 60
Controlling other TVs with the, remote, Release TV
View all Sony DVP-NC615S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer's code. 1 While holding down TV [/1, press the number buttons to select your TV's manufacturer's code (see the table below). 2 Release TV [/1. Checking the model name of your remote The supplied remote commander is different depending on the player model. Check the model name of your remote (RMT-D143A or RMT-D143E) so that you can input the correct manufacturer's code number to your remote. Model name Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. ◆For U.S./Canadian models (RMT-D143A) Manufacturer Sony (default) JVC Panasonic Philips RCA Samsung Sanyo Sharp Toshiba Zenith Code number 01 09 19 21 10 20 11 18 07 15 ◆For Asian/Oceanian models (RMT-D143E) Manufacturer Sony (default) JVC LG Panasonic Philips Samsung Sharp Toshiba Code number 01 33 06 17, 49 06, 08 23 29 38 Notes • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. 60