Sony DVP-NC650V Operating Instructions - Page 91

The angles cannot be changed. , Try using the DVD's menu instead of the direct selection buttons on the remote (page 37). , Multi-angles are not recorded on the DVD being played. The angle can be changed when the "ANGLE" indicator lights up on the front panel display (page 9). , The DVD prohibits changing of the angles. The player does not operate properly. , When static electricity, etc., causes the player to operate abnormally, press POWER on the player to turn the player off and then on again. Nothing is displayed on the front panel display. , "DIMMER" in "CUSTOM SETUP" is set to "OFF." Set "DIMMER" to "BRIGHT" or "DARK" (page 81). 5 numbers or letters are displayed on the screen and on the front panel display. , The self-diagnosis function was activated. (See the table on page 91.) The disc cannot be removed and "LOCKED" appears on the front panel display. , Contact your Sony dealer or local authorized Sony service facility. Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the player from malfunctioning, a five-character service number (e.g., C 13 00) with a combination of a letter and digits appears on the screen and the front panel display. In this case, check the following table. C:13:00 First three characters of the service number Cause and/or corrective action C 13 The disc is dirty. , Clean the disc with a soft cloth (page 7). C 31 The disc is not inserted correctly. , Re-insert the disc correctly. E XX (xx is a number) To prevent a malfunction, the player has performed the selfdiagnosis function. , Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10 Additional Information 91