Sony DVP-NC675PS Operating Instructions (DVP-NC675P CD/DVD Player) - Page 24

D Connecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital, or DTS decoder and 6 speakers This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver). CD/DVD player PCM/DTS/ DOLBY DIGITAL COMPONENT VIDEO OUT Y PB PR LINE OUT VIDEO NORMAL PROGRESSIVE OPTICAL COAXIAL DIGITAL OUT R-AUDIO-L LINE OUT S VIDEO OUT PCM/DTS/ DOLBY DIGITAL OPTICAL COAXIAL DIGITAL OUT to DIGITAL OUT (OPTICAL) to DIGITAL OUT (COAXIAL) Optical digital cord Coaxial digital cord (not supplied) or (not supplied) Remove jack cap before connecting. to optical digital input to Coaxial digital input [Speakers] AV amplifier (receiver) having a decoder [Speakers] Front (L) Center Rear (L) Subwoofer Front (R) l: Signal flow z Hint Use connection D when connecting to 7 or more speakers (6.1ch or more). Notes • After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to "ON" in Quick Setup (page 25). 24 Rear (R) • In order to listen to DTS sound tracks, you must use these connections. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set "DTS" to "ON" in Quick Setup (page 25). • When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set "48 kHz/96 kHz PCM" in "AUDIO SETUP" to "96 kHz/24 bit" (page 69).