Sony DVP-NC80V Operating Instructions (DVPNC80V) - Page 72

DISTANCE, Be sure to change the value in the Setup

Get Sony DVP-NC80V - Cd/dvd Player PDF manuals and user guides View all Sony DVP-NC80V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

• REAR LARGE SMALL NONE (REAR/SIDE): Normally select this position. Select according to the rear speaker position*. (REAR/SIDE): Select this when the sound distorts or the surround effects are difficult to hear. Select according to the rear speaker position*. Select this if you do not connect rear speakers. * Rear speaker position Correctly specify the location of the rear speakers to enjoy the surround effect. • Set to "SIDE," if the location of the rear speakers corresponds to section A below. • Set to "REAR," if the location of the rear speakers corresponds to section B below. This setting affects only "VIRTUAL REAR SHIFT," "VIRTUAL MULTI REAR," and "VIRTUAL MULTI DIMENSION" mode (page 47). This setting does not affect the Super Audio CD Multi audio signals. Notes • The cut off frequency for the subwoofer is fixed at 120 Hz. • If your speakers are too small to reproduce low bass frequencies, utilize a subwoofer for low frequency sound. When you set the speaker settings to "SMALL," the bass redirection circuitry will be activated and the bass frequencies for the speakers are output from the subwoofer. • Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers. ◆ DISTANCE Sets the distance from your listening position to the speakers. Set the distance to your front speakers in "FRONT" first (A). Then adjust the values in "CENTER" (center speaker B), and "REAR" (rear speaker C) to reflect the actual distance to your center speaker, and rear speakers. B 90 45 20 • SUBWOOFER YES NONE Select this if you connect a subwoofer to output the LFE (Low Frequency Effect) signals from the subwoofer. Select this if you do not connect a subwoofer. A (4~50 ft/ 1.2~ 15.2m) C A (4~50 ft/ 1.2~ 15.2m) C Be sure to change the value in the Setup Display each time you move the speakers. Start from the front speaker. The default adjustments are in parentheses. FRONT (10 ft/3m) CENTER (10 ft/3m) Set this between 4 and 50 ft (1.2m and 15.2m) in 1 ft (0.3m) increments. Set this within -5 and +2 ft (-1.5m and +0.6m) of the "FRONT" setting in 1 ft (0.3m) increments. For example, if "FRONT" is set to 17 ft (5.1m), "CENTER" can be set between 12 and 19 ft (3.6m and 5.7m). 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
72
• REAR
* Rear speaker position
Correctly specify the location of the rear speakers to
enjoy the surround effect.
•
Set to “SIDE,” if the location of the rear speakers
corresponds to section
A
below.
•
Set to “REAR,” if the location of the rear speakers
corresponds to section
B
below.
This setting affects only “VIRTUAL REAR
SHIFT,” “VIRTUAL MULTI REAR,” and
“VIRTUAL MULTI DIMENSION” mode
(page 47). This setting does not affect the Super
Audio CD Multi audio signals.
• SUBWOOFER
Notes
•
The cut off frequency for the subwoofer is fixed at
120 Hz.
•
If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set the speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies for the speakers are output from the
subwoofer.
•
Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
◆
DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (
A
). Then adjust the values in
“CENTER” (center speaker
B
), and
“REAR” (rear speaker
C
) to reflect the
actual distance to your center speaker, and
rear speakers.
Be sure to change the value in the Setup
Display each time you move the speakers.
Start from the front speaker. The default
adjustments are in parentheses.
LARGE
(REAR
/SIDE): Normally select
this position. Select according
to the rear speaker position*.
SMALL
(REAR/SIDE): Select this
when the sound distorts or the
surround effects are difficult to
hear. Select according to the
rear speaker position*.
NONE
Select this if you do not connect
rear speakers.
YES
Select this if you connect a
subwoofer to output the LFE
(Low Frequency Effect) signals
from the subwoofer.
NONE
Select this if you do not connect
a subwoofer.
90
20
45
FRONT
(10 ft/3m)
Set this between 4 and 50 ft
(1.2m and 15.2m) in 1 ft
(0.3m) increments.
CENTER
(10 ft/3m)
Set this within –5 and +2 ft
(–1.5m and +0.6m) of the
“FRONT” setting in 1 ft
(0.3m) increments. For
example, if “FRONT” is set
to 17 ft (5.1m), “CENTER”
can be set between 12 and
19 ft (3.6m and 5.7m).
B
A
A
C
C
(4~50 ft/
1.2~
15.2m)
(4~50 ft/
1.2~
15.2m)