Sony DVPNS90V Operating Instructions - Page 70
L1 - Settings for the Display (SCREEN SETUP), SCREEN SETUP
UPC - 027242667624
View all Sony DVPNS90V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select "SCREEN SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 68). The default settings are underlined. SCREEN SETUP TV TYPE: 16:9 HDMI RESOLUTION: AUTO YCBCR/RGB (HDMI): YCBCR SCREEN SAVER: ON BACKGROUND: JACKET PICTURE BLACK LEVEL: ON BLACK LEVEL (COMPONENT OUT): OFF 4:3 OUTPUT: FULL ◆ TV TYPE Selects the aspect ratio of the connected TV (4:3 standard or wide). 16:9 Select this when you connect a wide-screen TV or a TV with a wide mode function. 4:3 LETTER BOX Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 PAN SCAN Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 16:9 4:3 LETTER BOX Note Depending on the DVD, "4:3 LETTER BOX" may be selected automatically instead of "4:3 PAN SCAN" or vice versa. ◆ HDMI RESOLUTION Selects the type of video signals output from the HDMI OUT jack. When you select AUTO (default), the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/projector, etc. AUTO Normally, select this. 1920×1080i Sends 1920×1080i video signals. 1280×720p Sends 1280×720p video signals. 720×480p Sends 720×480p video signals. Note Even when a setting other than "AUTO" is selected and the connected TV cannot accept the resolution, the player automatically adjusts the video signals that are suitable for the TV. ◆ YCBCR/RGB (HDMI) Selects the type of HDMI signal output from HDMI OUT jack. YCBCR RGB Outputs YCBCR signals. Outputs RGB signals. Notes • If the playback picture becomes distorted, set "YCBCR" to "RGB." • If the HDMI OUT jack is connected to equipment with a DVI jack, "RGB" signals will be automatically output even when you select "YCBCR". 4:3 PAN SCAN 70