Sony DWZB70HL Product Manual (DWZM70-DWZB70HLOpsManual) - Page 11

f Cable clamp Secures the cable of the supplied AC adapter. g DC IN 12V (power input) connector Connect the supplied AC adapter here. DWZ-B70HL Body-pack transmitter (transmitter: ZTXB02RC) a Antenna cover Contains the antenna. Caution Do not squeeze the antenna cover. Doing so will weaken the signal that is transmitted, decreasing the transmission range. b BATT/CHARGE (remaining battery / charge) indicator Lights when the unit is turned on. This indicates the remaining battery charge or the charge status. Indicator Lit (green) Lit (red) Lit (orange) Status Good Almost dead Charging The remaining battery indication only appears when alkaline dry cell batteries are being used. c ENCRYPTION switch Allows you to use the encrypted transmission function. For details on the encrypted transmission function, see "Enabling Encrypted Transmission" (page 18). d Audio input connector Connect the supplied microphone or use a guitar cable (GC-0.7BMP; not supplied) to connect a guitar or similar instrument here. e AUDIO/MUTING indicator Indicates the input level of the audio signal and the status of the muting function. Indicator Lit (green) Lit (red) Off Blinking (orange) Status Audio input present Excessive audio input Audio input weak or nonexistent Muting function enabled (i.e., audio disabled) f INPUT switch Set this based on the connected equipment. MIC: Set to this position when a microphone is connected. INST/LINE: Set to this position when a guitar or audio equipment is connected. Caution Do not set the switch to the MIC position while inputting audio from an audio mixer or similar device. Outputting audio at excessive levels may distort audio or damage the playback/recording device. For details on the setting, see "System Configuration Examples" (page 22). g ATT (attenuator) switch Set the attenuation level based on the connected equipment. Attenuation level (dB) When to use 0 Standard switch position 10 Set to this position if the AUDIO/ MUTING indicator on the receiver occasionally lights red. 20 Set to this position if the AUDIO/ MUTING indicator on the receiver is always lit red. h Battery compartment Insert two LR6 (size AA) batteries here. For details on how to insert batteries, see "Inserting Batteries" (page 12). i POWER/MUTING button Turns the unit on or off. This button can also be used to enable or disable the muting function. Function Turn power on Turn power off Enable muting function Disable muting function Button operation Press the button for at least 1 second Press the button until indicator turns off Press the button j Channel display Displays the transmission channel. 11 Parts Identification