Sony EBS-N200 User Guide - Page 27

Picture Mode Control Web Pages, continued The Picture Mode section allows you to control the color scheme displayed on the display by using preset values. There are two types of preset values: values that are preset by the factory and values that are preset by a user. For example, press the Standard button to use the factory default settings for bright, contrast, color, phase and volume corresponding to the device and model specified, or press the User1 button to use user defined default settings. Note: The buttons displayed in the Picture Mode section exactly correspond to the controls available in the on-screen setup menu for the display. These are the controls that are accessible using the display's remote control. For more information, refer to the user guide for the display. To change a setting, perform the following steps: 1. Press a button, for example Standard, to use the default color scheme associated with that button. You cannot manually change the settings associated with that button by using the picture/volume sliders. To define user default settings, perform the following steps: 1. Press the button for which you want to define default settings, for example User1, User2, or User3. 2. In the Picture/Volume section, place your cursor over the slider of the setting that you want to change. 3. Click and hold down your left mouse button and drag the slider to the new setting. 4. Release your left mouse button. 5. Repeat steps 2 through 4 for each setting that you want to change. These settings are automatically saved and each time you press the associated button, the default color scheme is applied. EBS-N200 Network Display Adapter 27