Sony ELC-MVS01 Users Guide - Page 100

Chapter 4 Preparing Icons (Icon Manager) 2 In the Snapshot Settings block, set the snapshots you will use in the Effect Icon. For using multiple snapshots, you must make the required necessary settings in the Snapshot Settings block: the Standby Group#, Group Item Selection, and Group Name. For detailed settings, see "Preparing for Switching Multiple Snapshots Manually (2Box)" (page 139). Option Number of Snapshot Groups Description Specify how many snapshot groups should be used, from 1 to 4. A snapshot group represents a combination of snapshots, which you can recall by pressing the button assigned to a snapshot group on the shot box module. To recall one snapshot group, the number should be "1." To recall multiple snapshot groups, select 2 to 4, corresponding to the number of snapshot groups that you want to recall. • When "1" is selected: Example: One snapshot is used and camera and CG are mixed. Group Item Put a check mark next to the places where you want to use snapshots, and then specify a snapshot number using the drop-down list box. Number of DME CH Specify the number of DME channels to be used in the Icon. Note Specify the appropriate number when you use DME. The system will display insufficient-DME-resource warning messages in a playlist based on this setting. 3 In the Manual Switching block, set the manual switching you will use in the Effect Icon. For details, see "Preparing for Manual Switching" (page 145). Setting in the source window The Source window allows you to change the source settings of the bus. 1 Double click on the desired thumbnail in the Bus Settings block on the Effect Icon window. 100 Managing Icons