Sony EVI-HD1 Technical Manual - Page 38

Specifications Specifications System Video signal 1080i/59.94, 1080i/50, 1080p/29.97, 1080p/25, 720p/59.94,720p/50, 720p/29.97, 720p/25, NTSC (LB), NTSC (CR), NTSC (SQ), PAL (LB), PAL(CR), PAL (SQ) (switched with the SYSTEM SELECT switch) Synchronization Internal synchronization Image device 1/3 type (6 mm), CMOS Effective picture elements: Approx. 2,000,000 pixels Lens 10 × (optical), 40 × (digital) f = 3.4 - 33.9 mm, F1.8 - F2.1 Horizontal angle: 8 (TELE end) to 70 degrees (WIDE end) (When an HD signal is output) Minimum object distance 100 mm (4 inches) (WIDE end) Minimum illumination 15 lux (F1.8) with 50 IRE Shutter speed 1/2 to 1/10,000 sec. Video S/N 50 dB Pan/tilt action Horizontal: ± 100 degrees Maximum panning speed: 300 degrees/sec. Vertical: ± 25 degrees Maximum tilting speed: 125 degrees/sec. Input/output connectors Video output COMPONENT (HD OUT): D-sub 15-pin Y: 1Vp-p (tri-level sync, at 75ohm termination) Pb/Pr: ± 350 mVp-p, 75-ohm terminated HD/VD Sync: 1Vp-p, 75-ohm terminated Tri-level Sync: ± 300 mVpp,75-ohm terminated HD-SDI (HD OUT): BNC type, 800 mVp-p, 75 -ohm, conforming to SMPTE 292M serial interface standard VIDEO (SD OUT): RCA phono jack 1 Vp-p, 75-ohm unbalanced Synchronization: negative S VIDEO (SD OUT): Mini DIN 4pin type Control input/output VISCA IN: Mini DIN 8-pin type, RS-232C VISCA OUT: Mini DIN 8-pin type, RS-232C Power connector JEITA type4 (DC IN 12V) General Input voltage 12 V DC (10.8 to 13.0 V DC) Current consumption 2.5 A max. (at 12 V DC) Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature -20°C to +60°C (-4°F to 140°F) Dimensions Video camera: 259 × 150 × 169 mm (10 1/4 × 6 × 6 3/4 inches) (w/h/d) Remote Commander: 56 × 26 × 210 mm (2 1/4 × 1 1/16 × 8 3/8 inches) (w/h/d) Mass Video camera: Approx. 2 kg (4 lb 7 oz) Remote Commander: 190 g (3.8 oz) Installation angle Less than ± 15 degrees to the horizontal surface Supplied accessories AC power adaptor (1) AC power cord (1) Remote Commander (1) Operating Instructions (1) Design and specifications are subject to change without notice. 38