Sony EX50 User Manual - Page 21
Connecting a VCR, To connect to a video or S video, output connector, To connect to a video GBR - vpl projector manual
UPC - 027242737327
View all Sony EX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting a VCR This section describes how to connect the projector to a VCR. For more information, refer to the instruction manuals of the equipment you are connecting. To connect to a video or S video output connector Rear side VPL-EX50 To connect to a video GBR/ Component output connector Rear side VPL-EX50 Projecting the Picture to audio output (L) to audio output (R) to video GBR/ component output to S video output to audio output (L) to video output to audio output (R) VCR 1 Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) 2 Video cable (not supplied) or S-Video cable (not supplied) VCR 1 Signal Cable (not supplied) HD D-sub 15-pin (male) ↔ 3 × phono jack 2 Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) Notes • For stereo audio connection, connect the stereo audio connecting cable to following connectors: VPL-EX5/ES5: INPUT A/VIDEO IN AUDIO connector VPL-EW5: INPUT A AUDIO connector VPL-EX50: INPUT A/B AUDIO connector • Set the aspect ratio using "Aspect" on the INPUT SETTING menu according to the input signal. • When you connect the projector to a video GBR output connector, select "Video GBR" or when you connect the projector to a component output connector, select "Component" with the "Input-A Signal Sel." setting on the SET SETTING menu. Connecting the Projector 21