Sony FCBEH3150 Product Manual (Technial Manual for FCB-EH3150) - Page 30
VISCA Device Setting Command, For VISCA network administration, VISCA interface command
View all Sony FCBEH3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
VISCA Device Setting Command Before starting control of the FCB camera, be sure to send the Address command and the IF_Clear command using the broadcast function. For VISCA network administration Address Sets an address of a peripheral device. Use when initializing the network, and receiving the following network change message. Network Change Sent from the peripheral device to the controller when a device is removed from or added to the network. The address must be re-set when this message is received. Packet Address 88 30 01 FF Network Change X0 38 FF X = 9 to F: FCB camera address + 8 Note Always broadcasted. VISCA interface command IF_Clear Clears the command buffers in the FCB camera and cancels the command currently being executed. Command Packet Reply Packet Note IF_Clear 8X 01 00 01 FF X0 50 FF IF_Clear (broadcast) 88 01 00 01 FF 88 01 00 01 FF X = 1 to 7: FCB camera address (For inquiry packet) X = 9 to F: FCB camera address +8 (For reply packet) VISCA interface and inquiry CAM_VersionInq Returns information on the VISCA interface. Inquiry Inquiry Packet Reply Packet CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF Description GGGG = Vender ID (0020: Sony) HHHH = Model ID 045D:FCB-EH3150 JJJJ = ROM revision KK = Maximum socket #(02) X = 1 to 7: FCB camera address (For inquiry packet) X = 9 to F: FCB camera address +8 (For reply packet) Command List 30