Sony FCBEH6500 Product Manual (FCBEH6500 Technical Manual) - Page 13

Basic Functions Slow shutter - Auto/Manual When set to "Auto," ensures that the slow shutter is set automatically when the brightness drops. Effective only when the AE mode is set to "Full Auto." Set to "Slow Shutter Manual" at shipment. Note The Slow Shutter Auto function is not available in WD mode. When Auto Slow Shutter is OFF (initial setting) AGC ICR MAX IRIS OPEN Shutter 1/60 sec ICR ON GAIN IRIS SHUTTER Low-Illumination Chroma Suppress Mode Dark Bright ICR OFF U ON You can configure a chroma suppress mode for low- illumination conditions. This can be useful when color noise is particularly noticeable in such conditions. When Auto Slow Shutter is ON Four levels (disabled and three levels) are available for the low-illumination chroma suppress mode. Set the effect to be applied at approximately 15 dB. Higher setting values produce stronger chroma suppressing effects. ICR (IR Cut-Removable) Mode An infrared (IR) Cut-Filter can be disengaged from the image path for increased sensitivity in low light environments. The ICR will automatically engage depending on the ambient light, allowing the camera to be effective in day/night environments. When the auto ICR mode is set to ON, the image becomes black and white. Custom Color Gain You can customize and configure the color gain. Use this setting when bright color is particularly important. The initial setting 100% (4h) can be set to range from approx. 60% (Oh) to 200% (Eh) with 15 stages. Custom Color Phase You can customize and configure the color phase. The initial setting 0 degrees (7h) is adjustable between approx. −14 degrees (0h) and +14 degrees (Eh), in 15 increments. Auto ICR Mode Auto ICR Mode automatically switches the settings needed for attaching or removing the IR Cut Filter. With a set level of darkness, the IR Cut Filter is automatically disabled (ICR ON), and the infrared sensitivity is increased. With a set level of brightness, the IR Cut Filter is automatically enabled (ICR OFF). Also, on systems equipped with an IR light, the internal data of the camera is used to make the proper decisions to avoid malfunctions. Auto ICR Mode operates with the AE Full Auto setting. Note When in Auto_ICR_OFF state and WB data is added (default), a malfunction may occur when the subjects largely consisting of blue and green colors are taken. Camera ID The ID can be set up to 65,536 (0000 to FFFF). As this will be memorized in the nonvolatile memory inside, data will be saved regardless of whether it has been backed up. Effect It consists of the following functions. • Neg. Art: Negative/Positive Reversal • Black White: Monochrome Image Others E-FLIP This function turns the video output from the camera upside down. Mirror Image This function reverses the video output from the camera horizontally. 13