Sony FCBEX480C User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 7
Basic Functions, Overview of Functions
View all Sony FCBEX480C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Basic Functions Basic Functions Overview of Functions VISCA commands are the basis of camera control. Timing Chart As VISCA Command processing can only be carried out one time in a Vertical cycle, it takes the maximum 1V cycle time for an ACK/Completion to be returned. If the Command ACK/Completion communication time can be cut shorter than the1V cycle time, then every 1V cycle can receive a Command. General Commands Command RxD ACK Completion TxD Within 16.7msec(20msec*PAL) Query Commands RxD TxD Within 16.7msec(20msec*PAL) Command Completion 16 Byte Commands • Power On/Off Powers the camera on and off. When the power is off, the camera is able to accept only the lowest level of VISCA Commands; the display and other features are turned off. • I/F clear Clears the Command buffer of the FCB camera. Clearing the buffer can also be carried out from the control application software when the power is on. • Address set VISCA is a protocol, which normally can support a daisy chain of up to seven attached devices. However, the FCB camera does not support camera connections in a daisy chain. Therefore, whenever a camera is connected for the first time, be sure to use the address set to confirm the address. • ID Write Sets the camera ID. • Mute Blanks the screen and sends out a synchronizing signal. • Lens Initialization Initializes the zoom and focus of the lens. Even when power is already on, it initializes the zoom and the focus. • Comp Scan A pixel blemish-masking feature is used to reevaluate overall CCD pixel blemishes and mask severely flawed pixels automatically upon receiving the COMP SCAN command. This feature helps to mask the flaws found in CCD imagers, even after the camera has been powered on for some time. 7