Sony FCBEX490DP Product Brochure (fcbex) - Page 4

Video Motion Detection These cameras incorporate a video motion detection function. When motion is detected within an area of the picture designated by the user, an alarm signal is output via the camera's control interface using the VISCA protocol. Users can designate up to four detecting areas freely from any of 8 vertical and 12 horizontal blocks. Multi-Line On-Screen Display SMART (Sony Modular Automatic Lens Reset Technology) Lens Control These cameras incorporate SMART Lens Control technology that monitors the focus position of the lens during zooming and automatically compensates for any mechanical misalignment that may occur over long periods of continuous usage. With the introduction of SMART Lens Control, periodic lens initialization is no longer required during continuous 24-hour operation. Up to eleven lines with 20 characters per line can be displayed on the monitoring screen using VISCA commands. Users can freely display captions on the screen such as monitoring location, camera name, and alarm messages, providing operators with a user-friendly interface. Auto IR-Cut Filter Removal (ICR) These cameras incorporate an Auto ICR function for optimized sensitivity in both dayand night-shooting applications. At a set level of darkness, the IR-cut filter is automatically disabled (ICR ON) and the infrared sensitivity is increased. At a set level of brightness, the filter is automatically enabled (ICR OFF). The IR-cut filter automatically engages depending on the ambient light, allowing the capture of images in a variety of lighting conditions. Multi-Line On-Screen Display Electronic-Flip (e-Flip) These cameras have an e-Flip function that electronically flips an image upside down so that it is displayed on the monitor accurately. In a dome application for example, if a tracked object moves beneath the camera dome, the image is inverted to maintain the correct orientation. Picture Freeze The FCB-EX Series of cameras are equipped with a Picture Freeze function that allows for the output of a still image while the camera is panning, tilting, zooming, focusing, initializing the lens, or performing preset operations. For example, the camera will output a still image before it begins to pan, tilt, or zoom. Once the operation is completed, the camera continues to display images so that unnecessary images are not displayed.