Sony FDR-AX700 Help Guide - Page 38
Expected recording time of movie, Selecting the memory card slot to be used for recording, MARKER,
View all Sony FDR-AX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
When movie recording and outputting images to an external device (HDMI output) are performed simultaneously, [NIGHTSHOT LIGHT] is fixed to [OFF]. Also, when recording a movie with the [XAVC S 4K] 100Mbps setting or [XAVC S 4K] 60Mbps setting and outputting images to an external device (HDMI output) are performed simultaneously, [LCD BRIGHT] is fixed to [NORMAL]. When the access lamp is lit or flashing in red, the camcorder is reading or writing data on the memory card. Do not shake or apply strong force to the camcorder, do not turn the power off, and do not remove the memory card, battery pack, or the AC Adaptor. The image data may be destroyed. The LCD monitor of the camcorder can display recording images across the entire monitor (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. It is recommended you record images [MARKER] - [SAFETY ZONE] set to [80%] or [90%] using the displayed outer frame as a guide. The menu settings, picture profile settings, and settings made using the AUTO/MANUAL switch are stored when you close the LCD monitor and turn off the camcorder. The POWER/CHG (charge) lamp flashes while the settings are being stored. Check the subject on the LCD monitor, and then start recording. Hint You can set the recording lamp not to turn on. Select [OFF] on (OTHERS) - [REC LAMP]. Related Topic Expected recording time of movie Selecting the memory card slot to be used for recording MARKER REC LAMP SHOOTING MODE 4-725-312-11(2) Copyright 2017 Sony Corporation 38