Sony FST-ZUX9 Operating Instructions - Page 28

Creating your own program - Program Play You can make a program of up to 25 steps in the order you want them to be played back. 1 Press USB (or USB on the remote). 2 When playback is stopped, press PLAY MODE on the remote repeatedly until "PROGRAM" lights up in the display. 3 Press +/- repeatedly until the folder you want appears in the display. 4 Press . or > repeatedly until the track number you want appears in the display. Track name 5 Press ENTER. The track is programmed. The programmed step number appears in the display. 6 To program additional tracks. To program Repeat steps Other tracks on 4 and 5 the same folder Other tracks on 3 to 5 other folders 7 Press NX (or N on the remote). Program Play starts. Other operations To Do this Cancel Program Play When playback is stopped, press PLAY MODE on the remote repeatedly until "PROGRAM" light off from the display. Delete the last step Press CLEAR on the from the program remote when playback is list stopped. Note The program list is cleared when you perform the erase operation. Tip The program you made remains in the system's memory even after it has been played back. Press NX (or N on the remote) to play back the same program again. Playing repeatedly - Repeat Play You can play back all the tracks or a single track on an USB device repeatedly. Press REPEAT on the remote repeatedly during playback until "REP" or "REP 1" lights up in the display. • REP: All the tracks are played back repeatedly. • REP 1: A single track is played back repeatedly until "REP 1" is canceled. To cancel Repeat Play Press REPEAT on the remote repeatedly until both "REP" and "REP 1" light off from the display. 28GB