Sony FW-32BZ30J Wall-Mount Bracket: 3rd Party - Page 5
Landscape Style, Remove the stand covers., Remove the screws from the, rear of the LCD Display.
View all Sony FW-32BZ30J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Landscape Style The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to below illustration. FW-100BU40J / 100BZ40J 12 mm - 30 mm FW-100BU40J / 100BZ40J 1 Remove the stand covers. Screw (M8) Wall-Mount Bracket LCD Display's rear cover FW-75BU30J / 65BU30J / 55BU30J / 50BU35J / 50BU30J / 43BU35J / 43BU30J / 75BZ30J / 65BZ30J / 55BZ30J / 50BZ35J / 50BZ30J / 43BZ35J / 43BZ30J 10 mm - 12 mm 2 Remove the screws from the rear of the LCD Display. Screw (M6) Wall-Mount Bracket VS FW-32BU30J / 32BZ30J 10 mm - 12 mm Screw (M6) Wall-Mount Bracket LCD Display's rear cover Refer to the following table for wall-mount hole pattern. Model Name FW-100BU40J / 100BZ40J FW-75BU30J / 75BZ30J / 65BU30J / 65BZ30J / 55BU30J / 55BZ30J FW-50BU35J / 50BZ35J / 50BU30J / 50BZ30J / 43BU35J / 43BZ35J / 43BU30J / 43BZ30J FW-32BU30J / 32BZ30J Wall-mount hole pattern × 600 × 400 mm 300 × 300 mm 200 × 200 mm 100 × 200 mm Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. 3 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). Wall-Mount Bracket (not supplied) Screw (not supplied) When using an electric screwdriver, set the torque setting to approximately 1.5 N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for left/right) are secured. This may distort the Mounting Hook or the LCD Display cabinet. 5 (US)