Sony FWD55B2/DS User Manual (The FWD32B1,FWD42B2,FWD46B2 and FWD55B2 Operation - Page 77
Advanced Setup, Information, All Reset, Function and operation, Network Port, RS-232C
View all Sony FWD55B2/DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Advanced Setup Menu Network Port RS-232C LAN IP Address Setup Speed Setup Power On Delay HDMI Control HDMI Control Auto Device Off Auto Display On Information All Reset Function and operation Sets which terminal connects to the PC when the display is remote controlled by the PC. Notes • You cannot use REMOTE (STRAIGHT) and REMOTE ( ) simultaneously. • Select "LAN" when performing "IP Address Setup" or "Speed Setup". Select when connecting the display and PC via the REMOTE (STRAIGHT) connector. Select when connecting the display and PC via the REMOTE ( ) connector. Sets an IP address to enable communication between the REMOTE ( ) connector of the display and a device such as a PC connected with a LAN cable. For details on how to make the settings, see the section of "Preparations for Using the Network Functions" (page 32). Sets a communication speed between the REMOTE ( ) connector of the display and a device such as a PC connected with a LAN cable. For details on how to make the settings, see the section of "Preparations for Using the Network Functions" (page 32). Adjusts the time from when the display is switched on until it actually turns on. Sets to "Off", and 1 to 120 seconds. This suppresses a sudden load fluctuation to the power equipment when multiple units are connected. If you connect HDMI control compatible equipment to the HDMI input connector of the display, then the equipment can be controlled together. Note You should use the remote control to switch on/off the display and connected equipment. Select "On" or "Off". If you select "On", then HDMI equipment control works, and it can be set to "Auto Device Off" and "Auto Display On". Notes • If it does not work, also set HDMI settings on the connected equipment. • To control it, the connected equipment must be HDMI control compatible, and it must be set to enable HDMI equipment control. • Depending on the HDMI equipment, this may not operate together with this device in some cases. Select "On" or "Off". If you select "On", then when the display's power is switched off, the connected HDMI equipment's power is also switched off together. Select "On" or "Off". If you select "On", then when connected HDMI equipment play or other control is selected, the display's power also turns on together. Displays the "Date", "Model Name", "Serial Number", "Operation Time", "Software Version" and "IP Address" of your display. Select "Cancel" or "OK". If you select "OK", then all adjustments and settings reset to defaults. Note The items included in the "Information" option and the "Index Number" will not be reset. GB 31 GB