Sony GDM-C520K Operating Instructions - Page 28

I reinstalled the Artisan™ Color Reference, Brightness to non-zero values recommended Contrast = 100

Get Sony GDM-C520K - Artisan Color Reference System PDF manuals and user guides
UPC - 027242619432
View all Sony GDM-C520K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

My system has been calibrated, but my display is not set to "Professional" mode. I interrupted the calibration process, and now the display screen is completely black. I reinstalled the Artisan™ Color Reference System , and now my display does not seem to calibrate correctly. ❑ You will need to unlock the OSD, set it to "Professional" mode, and recalibrate your system. To unlock the OSD, press the display's Menu button. Then, press the Control button twice and select "Off". To set the display to "Professional" mode, press the display's Picture Effect button until the OSD shows "Professional". Then, recalibrate your system to all necessary calibrations. ❑ If you interrupt the calibration process while the screen is completely black, the RGB gains and biases will be set to zero, and the screen will display black. Use the display's OSD to reset RGB gains and biases to non-zero values (typically 50). It may also be necessary to reset Contrast and Brightness to non-zero values (recommended Contrast = 100, recommended Brightness = 50). ❑ Your system may have multiple calibration folders installed. Always install the software into the same folder. Also, do not move the Artisan™ Color Reference System folders after you have installed the program. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
28
My system has been calibrated, but my display is
not set to "Professional" mode.
You will need to unlock the OSD, set it to "Professional" mode, and recalibrate your system. To
unlock the OSD, press the display’s Menu button. Then, press the Control button twice and select
“Off”. To set the display to "Professional" mode, press the display’s Picture Effect button until
the OSD shows "Professional". Then, recalibrate your system to all necessary calibrations.
I interrupted the calibration process, and now the
display screen is completely black.
If you interrupt the calibration process while the screen is completely black, the RGB gains and
biases will be set to zero, and the screen will display black. Use the display’s OSD to reset RGB
gains and biases to non-zero values (typically 50). It may also be necessary to reset Contrast and
Brightness to non-zero values (recommended Contrast = 100, recommended Brightness = 50).
I reinstalled the Artisan™ Color Reference
System , and now my display does not seem to
calibrate correctly.
Your system may have multiple calibration folders installed. Always install the software into the
same folder. Also, do not move the Artisan™ Color Reference System folders after you have
installed the program.