Sony GDM-F400 Operating Instructions (primary manual) - Page 6

Setup Before using your monitor, check that the following accessories are included in your carton: • Power cord (1) • HD15 video signal cable (1) • USB cable (1) • Macintosh adapter (1) • Windows Monitor Information Disk (I) • Warranty card (1) • Notes on cleaning the screen's surface (1) • This instruction manual (1) Step 1: Connect your monitor to your computer Turn off the monitor and computer before connecting. , lit Connecting to an IBM PC/AT or compatible computer II Connecting to a Macintosh or compatible computer Use the supplied Macintosh adapter. DUD to HD15 Macintosh adapter (supplied)* u 0 Macintosh or to video compatible computer output HD15 video signal cable (supplied) * Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh and Power Macintosh G3 series computers. Macintosh 11 series and some older versions of PowerBook models may need an adapter with micro switches (not supplied). IN Connecting to the five BNC connectors to HD15 to video output BM PC/AT or compatible computer HD15 video signal cable (supplied) It your PC system Is not compatible with Plug & Play (DDC2AB or DDC2B+) This monitor uses the No.9 pin in the video signal connector for Plug & Play (DDC2AB or DDC2B+) compatibility. See page 5 for the location of the No.9 pin. • If your computer accepts the No.9 pin, use the supplied HD15 video signal cable. • If your computer does not accept the No.9 pin, plence consult your dealer for advice on obtaining an HD15 adapter. EmE 9 0_919_91. to VIDEO IN R/G/B Refer to the preceding examples to connect to your computer. to SYNC IN HDND • video signal cable (SMF-400, not supplied)* * Connect the cables from left to right in the following order: Red-GreenBlue-HD-VD. Notes • Do not touch the pins of the video cable connector as this might bend the pins. • Plug & Play (DDC) does not apply to the five BNC connectors. If you want to use Plug & Play, connect your computer to the HI)15 connector using the supplied video signal cable. 6