Sony GP-VPT2BT Help Guide - Page 8
Pairing the unit with the mounted camera - wireless grip
View all Sony GP-VPT2BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Help Guide Shooting Grip With Wireless Remote Commander GP-VPT2BT Pairing the unit with the mounted camera Establish a Bluetooth connection between this unit and a camera. Before establishing a Bluetooth connection, you must pair the unit with the camera (device registration). Note The following is an example of the mounting procedure for Sony Interchangeable Lens Digital Cameras and Sony digital still cameras. Before you start pairing, make sure that the LOCK switch on this unit is NOT in the "LOCK" position. 1 On the camera, select MENU → (network) → [Bluetooth Settings] → [Bluetooth Function] → [On]. 2 On the camera, select MENU → (network) → [Bluetooth Rmt Ctrl] → [On]. If the pairing screen appears on the camera's screen, proceed to step . 3 On the camera, select MENU → (network) → [Bluetooth Settings] → [Pairing]. 4 On this unit, press and hold the PHOTO button ( ) and the T side of the Zoom button ( ) simultaneously for at least 7 seconds. 5 When a confirmation message appears on the camera's screen, select [OK]. appears and pairing begins. When pairing is complete, [Paired.] appears. Note If pairing fails, the indicator on this unit flashes rapidly. If this happens, repeat the procedure all over again. A pairing attempt times out when a certain amount of time elapses between the actions in step and step . In the event of the following, pair this unit with the mounted camera all over again. 8