Sony GT620U Operating Instructions - Page 10
RDS, Overview, Setting AF and TA, Local Link function UK only
View all Sony GT620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items A Radio band, Function B TA/TP*1 C Frequency*2 (Program service name), Preset number, Clock, RDS data *1 "TA" flashes during traffic information. "TP" lights up while such a station is received. *2 While receiving the RDS station, " *" is displayed on the left of the frequency indication. To change display items C, press (DSPL). RDS services This unit automatically provides RDS services as follows: AF (Alternative Frequencies) Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same program during a long-distance drive without having to retune the same station manually. TA (Traffic Announcement)/TP (Traffic Program) Provides current traffic information/programs. Any information/program received, will interrupt the currently selected source. PTY (Program Types) Displays the currently received program type. Also searches your selected program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. Notes • Depending on the country/region, not all RDS functions may be available. • RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. 10 Setting AF and TA 1 Press (AF/TA) repeatedly until the desired setting appears. Select AF-ON TA-ON AF, TA-ON AF, TA-OFF To activate AF and deactivate TA. activate TA and deactivate AF. activate both AF and TA. deactivate both AF and TA. Storing RDS stations with the AF and TA setting You can preset RDS stations along with the AF/ TA setting. If you use the BTM function, only RDS stations are stored with the same AF/TA setting. If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each. 1 Set AF/TA, then store the station with BTM or manually. Receiving emergency announcements With AF or TA on, the emergency announcements will automatically interrupt the currently selected source. Tip If you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level. Staying with one regional program - REG When the AF function is on: this unit's factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program's reception area, set "REG-OFF" in setup during FM reception (page 14). Note This function does not work in the UK and in some other areas. Local Link function (UK only) This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1 During FM reception, press a number button ((1) to (6)) on which a local station is stored.