Sony GTK-X1BT Operating Instructions - Page 23
Using the timers, Using optional equipment, Sleep Timer, Play Timer
View all Sony GTK-X1BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
To turn off the light illumination Press LED SPEAKER repeatedly to select "LED OFF". Note If the light illumination brightness is glaring, switch on the room lights or turn off the light illumination. Using the timers The system offers 2 timer functions. If you use both timers, the Sleep Timer has priority. Sleep Timer You can fall asleep while listening to music. The system turns off after the preset time. Press SLEEP repeatedly. To cancel Sleep Timer, press SLEEP repeatedly to select "OFF". Tip To check the remaining time before the system turns off, press SLEEP. Play Timer You can wake up to tuner or USB device at a preset time. Make sure you have set the clock. 1 Prepare the sound source, then press VOLUME +/- to adjust the volume. 2 Press TIMER MENU. 3 Press / repeatedly to select "PLAY SET", then press . 4 Set the time to start playback. Press / repeatedly to set the hour/minute, then press . 5 Use the same procedure as in step 4 to set the time to stop playback. 6 Press / repeatedly to select the sound source you want, then press . 7 Press ?/1 to turn off the system. To check the timer setting or activate the timer again 1 Press TIMER MENU. "TIMERSEL" flashes in the display panel. 2 Press . 3 Press / repeatedly to select "PLAY SEL", then press . To cancel the timer Repeat the same procedure as above and select "OFF" in step 3, then press . Notes • The system turns on before the preset time. If the system is turned on at the preset time or if "STANDBY" flashes in the display panel, the Play Timer will not play. • Do not operate the system from the time the system turns on until the playback starts. Using optional equipment 1 Press VOLUME - repeatedly until "VOL MIN" appears in the display panel. 2 Connect an optional equipment (page 10). 3 Press FUNCTION +/- repeatedly to select the AUDIO IN function. 4 Start playing the connected equipment. 5 Press VOLUME + repeatedly to adjust the volume. 23GB Other Operations