Sony GTK-XB60 Operating Instructions - Page 37
Party Chain and speaker add, function, Press RESET on the rear of, the unit with a pin or other
View all Sony GTK-XB60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
There is severe hum, noise, or distorted sound. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. •• If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. •• Turn down the volume of the connected BLUETOOTH device. Party Chain and speaker add function Wired Party Chain function cannot be activated. •• Check the connections (page 24). •• Make sure the audio cords are connected correctly. •• Select the function other than the Audio In function (page 26). Wired Party Chain function does not work properly. •• Turn off the system. Then, turn it back on again to activate the Wired Party Chain function. Unable to connect a BLUETOOTH device with the system in the Wireless Party Chain function. •• After connecting all of the systems, perform the pairing procedure between the BLUETOOTH device and the system whose W.PARTY CHAIN LIGHT indicator is lit up. Then perform the BLUETOOTH connection. Unable to connect a BLUETOOTH device with the system in the speaker add function. •• After connecting two GTK-XB60 or two GTK-XB90 systems, perform the pairing procedure between the BLUETOOTH device and the system whose (BLUETOOTH) indicator is flashing. Then perform the BLUETOOTH connection. Resetting the system If the system doesn't respond and cannot be operated despite the power being on, reset the system using the RESET button. 1 Press RESET on the rear of the unit with a pin or other pointed object. The system will turn off. 2 Press to turn the system back on. Notes ••If the system doesn't turn back on, consult your Sony dealer. ••Pairing information is not deleted when you press RESET. Additional Information 37GB