Sony HAP-S1 Reference Guide - Page 8
Jack General and others, AC 120 V 60 Hz - network standby
View all Sony HAP-S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Jack section Input section COAXIAL IN Input impedance: 75 ohms Supported playback format: LPCM 2ch OPTICAL IN Supported playback format: LPCM 2ch LINE IN 1, 2 Input sensitivity: 500 mV Input impedance: 100 kilohms Output section Output jacks LINE OUT Output impedance: 2.2 kilohms 2 Hz - 80 kHz (-3 dB) PHONES (headphone jack) Stereo jack: 8 ohms or higher EXT port Type A USB, Hi-Speed USB, for connecting an external hard disk drive General and others Power requirements AC 120 V 60 Hz Power consumption On: 80 W During standby mode (when [Network Standby] is set to [Off]): 0.3 W During standby mode (when [Network Standby] is set to [On] and a wired LAN is used): 2.6 W During standby mode (when [Network Standby] is set to [On] and a wireless LAN is used): 2.8 W Dimensions (approx.) (w/h/d) 265 mm × 88 mm × 304 mm (10 1/2 inch × 3 1/2 inch × 12 inch) including projecting parts and controls Mass (approx.) 5.8 kg (12 lbs 12 5/8 oz) Supplied accessories AC power cord (1) Remote control (RM-ANU183) (1) R03 (size-AAA) batteries (2) LAN cable (1) Quick Start Guide (1) Reference Guide (this manual) (1) Design and specifications are subject to change without notice. 8US