Sony HBD-HZ970W Operating Instructions - Page 30
Step 5: Performing the Easy Setup
View all Sony HBD-HZ970W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Getting Started 4 Press "/1 to turn the surround amplifier on. When wireless transmission is activated, the S-AIR/STANDBY indicator turns green. S-AIR/STANDBY indicator S-AIR/STANDBY "/1 If the S-AIR/STANDBY indicator does not turn green, see "Surround amplifier" (page 13). For details of the S-AIR function, see "Using an S-AIR Product" (page 47). About the standby mode The surround amplifier enters standby mode automatically (the S-AIR/STANDBY indicator turns red) when the main unit is in standby mode or wireless transmission is deactivated. The surround amplifier turns on automatically (the S-AIR/STANDBY indicator turns green) when the system is turned on and wireless transmission is activated. Step 5: Performing the Easy Setup Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model. Note • To use the optional surround back speakers, set [Surround Back] in [Speaker Settings] to [Yes] (page 55). 123 456 789 0 "/1 C/X/x/c, HOME 1 Turn on the TV. 2 Connect the calibration mic to the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. 30US