Sony HCD-CPX22 Operating Instructions - Page 13
Manual tuning preset, Other operations, To improve tuner reception, To set CD power
View all Sony HCD-CPX22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Tuner 6 Press - or + (or TUNING - or + on the unit) repeatedly to select the desired preset number. 7 Press ENTER. 8 Repeat steps 2 through 7 to store other stations. Tip Press TUNING MODE to stop scanning. Manual tuning preset You can manually tune in and store the radio frequency of the desired stations. 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select "FM" or "AM". 3 Press TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display. 4 Press - or + (or TUNING - or + on the unit) repeatedly to tune in the desired station. 5 Press TUNER MEMORY. 6 Press - or + (or TUNING - or + on the unit) repeatedly to select the desired preset number. 7 Press ENTER. 8 Repeat steps 2 through 7 to store other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in "Manual tuning preset" (page 13). Set another station to the existing preset number After step 5, press - or + (or TUNING - or + on the unit) repeatedly to select the preset number you want to store the station. To improve tuner reception When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on. Use buttons on the unit for the operation. 1 Press CD. 2 Press ?/1 to turn off the system. 3 Press ?/1 while holding x. "CD POWER OFF" appears. To set CD power on Repeat the procedure above and "CD POWER ON" appears. Notes • When "CD POWER OFF" is selected, disc access time is increased. • You cannot change the setting in Power Saving Mode (page 23). To change the AM tuning interval (except for European, Russian and Saudi Arabian models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding x, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in Power Saving Mode (page 23). Tips • The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. 13GB