Sony HCD-EC719iP Operating Instructions - Page 25

General The system does not turn on.  Is the power cord plugged in? The system has entered standby mode unexpectedly.  This is not a malfunction. The system enters standby mode automatically in about 30 minutes when there is no operation or audio signal output. See "To turn off the automatic standby function" (page 28). The clock setting or the Play Timer operation has been cancelled unexpectedly.  If about a minute elapses with no operation, the clock setting or Play Timer setting is cancelled automatically. Perform the operation again from the beginning. There is no sound.  Are the + and  speaker cords short- circuited?  Are you using only the supplied speakers?  Is anything blocking the ventilation holes of the system?  The specified station may have temporarily stopped broadcast. Sound comes from one channel, or the left and right volumes are unbalanced.  Place the speakers as symmetrically as possible.  Connect only the supplied speakers. Severe hum or noise.  Move the system away from sources of noise.  Connect the system to a different wall outlet.  Install a noise filter (available separately) to the power cord. The remote control does not function.  Remove any obstacles between the remote control and the remote control sensor on the unit, and position the unit away from fluorescent lights.  Point the remote control at the system's sensor.  Move the remote control closer to the system. Except , no buttons on the unit work, and "LOCK ON" appears on the display.  The child lock function has been enabled. To disable the child lock, hold down  on the unit until "LOCK OFF" appears on the display. A disc cannot be ejected and "LOCKED" appears on the display.  Contact your Sony dealer or local authorized Sony service facility. Additional Information CD/MP3 disc The sound skips, or the disc will not play.  Wipe the disc clean, and replace it.  Move the system to a location away from vibration (for example, on top of a stable stand).  Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Play does not start from the first track.  Set the play mode to normal play mode. Starting playback takes more time than usual.  The following discs can increase the time it takes to start playback; a disc recorded with a complicated tree structure. a disc recorded in multisession mode. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders. iPod/iPhone There is no sound.  Make sure the iPod/iPhone is connected securely.  Make sure the iPod/iPhone is playing music.  Make sure the iPod/iPhone is updated with the latest software. If not, update the iPod/iPhone before using with the system.  Adjust the volume. 25GB