Sony HCD-GX40 Operating Instructions - Page 8
Hooking up the system continued, only for models equipped with an adapter.
View all Sony HCD-GX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Hooking up the system (continued) 3 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Jack type A Extend the FM lead antenna AM loop antenna horizontally FM75 AM Jack type B Extend the FM lead antenna horizontally AM loop antenna FCMO7A5XIAL 4 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. 230 - 240V 220V 120V* * Middle Eastern models: 120 - 127 V 5 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). To connect optional components See page 24. To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. AM Note Keep the speaker cords away from the antennas to prevent noise. 8GB