Sony HCD-HPX10W Operating Instructions - Page 25
Placing the transmitter, Listening to audio using a, wireless system, Optional Components
View all Sony HCD-HPX10W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Placing the transmitter Placing it up off the floor, such as on a desk, is recommended. The transmitter has a signal reception area of 1 to 46 m. However, this distance may be reduced depending on the surroundings and environment, such as obstacles (wall, etc.). Notes • Do not place the transmitter on or near the following objects. Doing so may cause noise. - Main unit, TV, speaker, fluorescent lamp, floor. - Radio waves generated such as cell phones and cordless phone systems or metal instruments are placed on the unit. - Inside a building with walls containing steel beams. - Area with many steel file cabinets, etc. - Area with many electrical appliances capable of generating electromagnetic noise. - Area facing roadways. - Radio transceivers in trucks, etc. - Wireless communication systems installed along roadways. • Even within the signal reception area, there are some spots (dead spot) where the RF signal cannot be received. This is a characteristic inherent to RF signals, and does not indicate a malfunction. By slightly moving the transmitter, the location of the dead spot can be changed. Listening to audio using a wireless system 1 Start playing the connected component. 2 Press FUNCTION repeatedly to switch the function to WIRELESS. 3 Press +/- (or TUNING +/- on the unit). "AUTO SCAN" appears. If the system picks up some noise or "AUTO SCAN" does not disappear • Reduce the distance between the transmitter unit and the main unit. • Select another channel using CHANNEL 1-3 on the transmitter, then press +/- (or TUNING +/- on the unit). "AUTO SCAN" appears. Notes • You may not hear the beginning of the sound from the main unit until the transmitter starts sending the RF signals after detecting an audio signal. • If the transmitter is connected to the headphones jack of the source component, set the volume of that component as high as possible without distorting the audio signal. • If you hold the antenna of the transmitter with your hand, noise may occur. However this is not a malfunction. • When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the wall outlet holding the plug. Do not pull on the cord. 25GB Optional Components