Sony HCD-LX90AV Operating Instructions - Page 14

Playing a CD (continued) To Do this Stop playback Press x. Pause Press HX (or X on the remote). Press HX again to resume playback (or CD H on the remote). Select a track During playback or pause, turn the jog dial clockwise (to go forward) or counterclockwise (to go backward) and release it when you reach the desired track. Or press AMS* > (to go forward) or AMS . (to go backward) on the remote. Find a point Press M or m during in a track playback, and release at the desired point . Select a CD Press one of the DISC 1 - DISC 5 buttons (or DISC SKIP). Play only the Press PLAY MODE repeatedly CD you have until "1 DISC" appears. selected Play all CDs Press PLAY MODE repeatedly until "ALL DISCS" appears. Remove or change the CDs Press PUSH OPEN. Adjust the volume Turn VOLUME (or press VOL +/- on the remote). * AMS: Automatic Music Sensor Tips • Pressing HX while the system power is off automatically turns on the system and starts CD playback if there is a CD on the tray (One Touch Play). One Touch Play is not available in Power Saving mode. • You can switch from another source and begin playing a CD just by pressing HX, one of the DISC 1 - DISC 5 buttons, or CD H on the remote (Automatic Source Selection). • If there is no CD in the player, "NO DISC" appears in the display. • You can change the CD which is in the loading position during playback of the CD which is in the playing position. Recording a CD - CD Synchro Recording This function lets you easily record from a CD to a tape. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 1 ? /1 (Power) DSP x h 6 DOLBY NR 2,3 7 x 4 5 1 Press Z B EJECT and insert a recordable tape into deck B. With the side you want to record on facing forward 2 Press PUSH OPEN and place a CD. With the label side up. When you play a CD single, place it on the inner circle of the tray. 14