Sony HCD-NEZ3 Operating Instructions - Page 11

CD/MP3 - Play Creating your own program - Program Play You can make a program of up to 25 steps. You can synchro record the programmed tracks onto a cassette tape (page 16). 1 Press CD (or FUNCTION repeatedly) to switch the function to CD. 2 Press PLAY MODE in stop mode repeatedly until "PGM" appears. 3 Press . or > repeatedly until the desired track number appears. When programming the MP3 audio tracks, press + or - to select album, then press . or > repeatedly until the desired track number appears. Other operations To Do this Cancel Program Play Press PLAY MODE in stop mode repeatedly until both "PGM" and "SHUF" disappears. Erase the program Press CLEAR in stop mode. Each time you press the button, a track is cleared from the end of the program. Add a track to the end of Perform steps 3 and 4 in the program stop mode. Tips • The program you made remains after Program Play finishes. To play the same program again, press N (or CD/NX on the unit). However, the program is cleared when you open the CD compartment. appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track. Selected track number Total playing time (including selected track) 4 Press ENTER. The track is programmed. The program step number appears, followed by the last programed track number and the total playing time. 5 To program additional tracks, repeat steps 3 and 4. 6 Press N (or CD/NX on the unit). Program Play starts. 11GB