Sony HCD-S500 Operating Instructions - Page 23
Setup for the system for Asian and Australian models, Connecting the AC Power Cord mains lead
View all Sony HCD-S500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
AM COAXIAL FM 75Ω VIDEO OUT VIDEO IN VIDEO IN SVIDEO (DVD ONLY) AUDIO OUT AUDIO IN AUDIO IN L L OPTICAL OPTICAL DIGITAL (CD ONLY) IN R R VIDEO SPEAKER FRONT R CENTER FRONT L REAR R WOOFER REAR L Getting Started IN OUT VIDEO VIDEO IN OUT AUDIO AUDIO IN OUT L R OUT VIDEO OUT AUDIO OUT L R OUT OUTPUT OPTICAL IN INPUT VIDEO IN VCR Digital satellite receiver TV monitor If you connect a digital satellite receiver with the OPTICAL jack The digital satellite receiver can be connected to the OPTICAL jack instead of the VIDEO IN and AUDIO IN L/R jacks of the system. The system can accept both the digital and analog signals. Digital signals have priority over analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds. If you connect a digital satellite receiver without the OPTICAL jack Connect the digital satellite receiver to the VIDEO IN and AUDIO IN L/R jacks only of the system. Setup for the system (for Asian and Australian models) Setup is necessary for the system, depending on the TV monitor to be connected. If the colour system of the TV is NTSC or DUAL Since the colour system of the system is set to NTSC, you can use this system as it is. If the colour system of the TV is PAL To set the system to PAL, turn on the system while pressing the X button on the system. To reset to NTSC, turn off the system and then turn on while pressing the X button on the system again. Connecting the AC Power Cord (mains lead) Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains), connect the speakers to the system (see page 17). Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains). 23