Sony HDC3300R Brochure (HDC Camera Series) - Page 25

CNU-700 Camera Command Network Unit The CNU-700 allows communication between all the units in the system, and provides the ability to assign CCUs, MSUs, RCPs, and HDC-2000 Series camera heads. A RISC-based microprocessor system provides high-speed transfer of command signals to the HDCU-2000 and HDCU-2500 Camera Control Unit for rapid response and reliable control. One CNU-700 unit can control six cameras, and can be expanded to control up to 12 cameras when fitted with an optional BKP-7930 Expansion Board. Several CNU-700 units can be connected to the camera control network in a large system. The CNU-700 supports RCP assignment and an S-BUS interface*1. *1 An optional BKP-7933 S-BUS Interface Board is required. HZC-CSM10 Camera System Management Software The HZC-CSM10 is a Microsoft Windows-based Master Setup Unit (MSU) software application for controlling the camera system from a PC. It has similar features to a hardware-based MSU, offering camera control, optical level display, file management, remote control panel (RCP) assignment, and diagnosis. The HZC-CSM10 GUI controls any parameters of the system camera and enables visual setting lists. It acts as a software client to a master hardware MSU. System requirements Operating system: Windows® 7 (with Service Pack 1 installed), Windows 8 Professional: 32-/64-bit, Ultimate: 32-/64-bit (The software cannot be installed on Windows Vista® and Windows XP.) CPU: 1 GHz or faster 32-bit (x86) or 64-bit (x64) processor Memory: 2 GB or more Hard disk: 50 MB or more of free space HZC-CSM10 Camera System Management Software Camera Head CCU MCS Mode: Client CNA-1 CNU-700 Camera Head CCU MCS Mode: Client Network Hub Camera Head CCU MCS Mode: Client HZC-CSM10 Software PC RCP-1000/1500 Series : LAN Cable 25