Sony HDR-FX1 Operating Instructions - Page 39
Recording an index signal at the beginning of recording, Recording an index signal at
UPC - 027242654815
View all Sony HDR-FX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Recording 2 Press REC START/STOP. The FADER indicator stops flashing and disappears when the fade is complete. To cancel the operation Press the ASSIGN button assigned to the FADER function repeatedly until the FADER indicators disappear. b Note • You cannot use the FADER function together with [FRAME REC] (Frame recording). Recording an index signal at the beginning of recording If you make an index for a scene, you can easily search for the scene later (p. 50). The index function will make it easier to check the transition of recording or edit your pictures using index signals. Assign the index function to one of the ASSIGN buttons in advance. See page 68 to assign a function. Press the ASSIGN button assigned to the index function. When pressed during recording appears for about 7 seconds and an index signal is recorded. When pressed in the standby mode flashes. After you press REC START/STOP to start recording, appears for about 7 seconds and an index signal is recorded. To cancel the operation Before starting to record, press the ASSIGN button assigned to the index function again. b Note • You cannot record an index signal on a recorded tape afterward. REC START/STOP Recording 39