Sony HDR-PJ430V Operating Guide - Page 62
rechargeable battery, How to charge the pre-installed
View all Sony HDR-PJ430V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
LCD screen Do not apply excessive pressure on the LCD screen, as it may cause uneven color and other damage. If your camcorder is used in a cold place, a residual image may appear on the LCD screen. This is not a malfunction. While using your camcorder, the back of the LCD screen may heat up. This is not a malfunction. To clean the casing and the projector lens (Models with a projector) Wipe the casing and the lens gently with a soft cloth such as a cleaning cloth or eyeglass cleaning cloth. If the casing and the projector lens is very dirty, clean the camcorder casing and the lens with a soft cloth lightly moistened with water, and then wipe the casing and the projector lens with a dry soft cloth. Avoid the following so as not to deform the casing, damage the finish or scratch the lens: Using chemicals such as thinner, benzine, alcohol, chemical cloths, insect repellent, insecticide and sunscreen Handling the camcorder with the above substances on your hands Leaving the camcorder in contact with rubber or vinyl objects for a long period of time About care and storage of the lens Wipe the surface of the lens clean with a soft cloth in the following instances: When there are fingerprints on the lens surface In hot or humid locations When the lens is exposed to salty air such as at the seaside Store in a well-ventilated location subject to little dirt or dust. To prevent mold, periodically clean and store 62GB the lens as described above. On charging the pre-installed rechargeable battery Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the LCD screen is closed. The pre-installed rechargeable battery is always charged while your camcorder is connected to the wall outlet (wall socket) via the AC Adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Charge the pre-installed rechargeable battery before you start using your camcorder. However, even if the pre-installed rechargeable battery is not charged, the camcorder operation other than date recording will not be affected. How to charge the pre-installed rechargeable battery Connect your camcorder to a wall outlet (wall socket) using the supplied AC Adaptor, and leave it with the LCD screen closed for more than 24 hours. Note on disposal/transfer the ownership of the camcorder (Models with internal memory) Even if you delete all movies and still images, or perform [Format] (p. 51), data on the internal memory may not be completely erased. It is recommended that you select [Setup] [ Media Settings] [Format] [Empty] to prevent the recovery of your data.