Sony HDR-PJ810 Help Guide - Page 127
HDR-PJ810/PJ810E/PJ820/PJ820E, Recording movies, this may cause slight trimming of the top, bottom
View all Sony HDR-PJ810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Help Guide How to Use Digital HD Video Camera Recorder HDR-PJ810/PJ810E/PJ820/PJ820E Recording movies Record movies. 1. Open the LCD monitor of this product and turn the power on. 2. Press START/STOP to start recording. To stop recording, press START/STOP again. Note If you close the LCD monitor while recording movies, this product stops recording (only when the viewfinder is retracted). The maximum continuous recordable time of a movie is about 13 hours. When a movie file exceeds 2 GB, the next movie file is created automatically. The following states will be indicated if data is still being written onto the recording media after recording has finished. During this time, do not apply shock or vibration to this product, or remove the battery pack or AC Adaptor. Access lamp is lit or flashing The media icon in the upper right of the LCD monitor is flashing The LCD monitor of this product can display recording images across the entire monitor (full pixel display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when played back on a TV which is not compatible with full pixel display. It is recommended you record images with [Grid Line] set to [On] using the outer frame of [Grid Line] as a guide. Check the subject on the LCD monitor, and then start recording. If the lens cover does not fully open, only a black screen and sound may be recorded. 123