Sony HDR-PJ810 Operating Instructions - Page 30

1/25 second (HDR-PJ810E/ PJ820E)) *3 The unique pixel array of Sony's ClearVid and the image processing system (BIONZ-X) allow still image resolution equivalent to the sizes described. *4 [ SteadyShot] is set to [Standard] or [Off]. *5 [ SteadyShot] is set to [Active]. Input/Output connectors HDMI OUT jack: HDMI micro connector PROJECTOR IN jack: HDMI micro connector MIC input jack: Stereo minijack (3.5 mm) Headphone jack: Stereo minijack (3.5 mm) USB jack: Type A (Built-in USB) Multi/Micro USB Terminal* * Supports Micro USB compatible devices. USB connection is only for output (HDR-PJ810E/PJ820E). LCD monitor Picture: 7.5 cm (3.0 type, aspect ratio 16:9) Total number of pixels: 921 600 (640 × 1 440) Projector Projection type: DLP Light source: LED (R/G/B) Focus: Manual Throw Distance: 0.5 m (1.6 feet) or over Resolution (output): 854 × 480 GB 30 Continuous projection time (when using the supplied battery pack): Approx. 2 h. Wireless LAN Supported standard: IEEE 802.11 b/g/n Frequency: 2.4 GHz Supported security protocols: WEP/WPA-PSK/WPA2-PSK Configuration method: WPS (Wi-Fi Protected Setup)/manual Access method: Infrastructure Mode NFC: NFC Forum Type 3 Tag compliant General Power requirements: DC 6.8 V/7.2 V (battery pack), DC 5 V 1 500 mA (AC Adaptor), DC 8.4 V (DC IN jack) USB Charging: DC 5 V 1 500 mA Average power consumption: During camera recording using the viewfinder at normal brightness: 2.9 W During camera recording using LCD monitor at normal brightness: 3.1 W Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F) Dimensions (approx.): 67.5 mm × 72.5 mm × 134 mm (2 3/4 in. × 2 7/8 in. × 5 3/8 in.) (w/h/d) including the projecting parts 67.5 mm × 72.5 mm × 134 mm (2 3/4 in. × 2 7/8 in. × 5 3/8 in.) (w/h/d) including the projecting parts, the supplied