Sony HDR SR7 Operating Guide - Page 10

To charge the battery pack using only the AC Adaptor Slide the POWER switch to OFF (CHG), then connect the AC Adaptor directly to the DC IN jack on the camcorder. POWER switch With the v mark on the right DC plug DC IN jack Open the jack cover. Available running time for the supplied battery pack Charging time: Approximate time (min.) required when you fully charge a completely exhausted battery pack. Recording/Playback time: Approximate time (min.) available when you use a fully charged battery pack. "HD" stands for high definition image quality, and "SD" stands for standard image quality. NP-FH60: HDR-SR5 HD SD (Unit:min.) HDR-SR7/ SR8 HD SD Charging time 135 Recording time*1 Continuous recording time 100*2 115*2 105*3 125*3 Typical recording time*5 50*2 55*2 50*3 60*3 135 90*2 100*2 90*3 105*3 90*4 105*4 45*2 50*2 45*3 50*3 45*4 50*4 Playback time*2 145 165 140 160 10 *1 All times of image quality measured with SP recording mode when [ INDEX SET] is set to [OFF]. *2 When the LCD backlight turns on. *3 When the LCD backlight turns off. *4 When recording with the viewfinder while the LCD panel is closed. *5 Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. On the battery pack • Before changing the battery pack, slide the POWER switch to OFF (CHG) and turn off the (Movie) lamp/ (Still) lamp (p. 11). • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or the Handycam Station, even when the power cord is disconnected from the wall outlet. On the charging/recording/playback time • Times measured when using the camcorder at 25°C (77°F) (10°C to 30°C (50°F to 86°F) is recommended). • The available recording and playback time will be shorter when you use your camcorder in low temperatures. • The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Use the nearby wall outlet when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet immediately if any malfunction occurs while using your camcorder. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. • Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC Adaptor.