Sony HT-6800DP Operating Instructions (DVP-NC675P CD/DVD Player) - Page 63

Using Various Additional Functions Controlling Your TV with the Supplied Remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. Note Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote. Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturing code. 1 While holding down TV [/1, press the number buttons to select your TV's manufacturer's code (see the table below). 2 Release TV [/1. Number buttons You can control the following items with the supplied remote. By pressing TV [/1 VOL +/- TV/VIDEO You can Turn the TV on or off Adjust the volume of the TV Switch the TV's input source between the TV and other input sources Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer Code number Sony 01 (default) Daewoo 04, 22 Hitachi 02, 04 JVC 09 LG/Goldstar 04 MGA/Mitsubishi 04, 13 Panasonic 19 Philips 21 RCA 04, 10 Samsung 04, 20 Sharp 18 Toshiba 07, 18 Notes • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. • Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote. 63