Sony HT-6900DP HT5950DP Instructions (entire HT system) - Page 41
Selecting the speaker system, Recording, Other Operations
View all Sony HT-6900DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Other Operations Selecting the speaker system You can select the front speaker system you want to use by pressing the following button. The selected speaker system appears in the display. Model HT-9950M, HT-9900M and HT-6900DP HT-5950DP Button SPEAKERS (OFF/A/B/A+B) Indications SP A SP B SPEAKERS SP (ON/OFF) To turn off the speaker output, press the button repeatedly until the indications in the display turn off. The speaker system (HT-5950DP only) • SP The speakers connected to the SPEAKERS FRONT terminals. (HT-9950M, HT-9900M and HT-6900DP only) • SP A The speakers connected to the SPEAKERS FRONT A terminals. • SP B The speakers connected to the SPEAKERS FRONT B terminals. • SP A and SP B The speakers connected to both the SPEAKERS FRONT A and B terminals (parallel connection). Recording Before you begin, make sure you have connected all components properly. Recording on an audio tape or MiniDisc You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help. 1 Select the component to be recorded. 2 Prepare the component for playing. For example, insert a CD into the CD player. 3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary. 4 Start recording on the recording deck, then start playback on the playback component. Notes • Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks. • The analog audio signals of the current input is output from the MD/TAPE OUT jacks. • (HT-9950M, HT-9900M and HT-6900DP only) The signals input to the MULTI CH IN jacks are not output from the MD/TAPE OUT jacks even when MULTI CH IN is being used. The analog audio signals of the current or previously used input are output. continued 41US