Sony HT-7000DH Installation Guide - Page 1

Sony HT-7000DH - Component Home Theater System Manual

Page 1 highlights

2-662-964-01(1) DVD HOME THEATRE SYSTEM HT-7000DH Speaker Connection This Speaker Connection explains how to connect the DVD player, TV, speakers, and sub woofer so you can enjoy multi channel surround sound from the DVD player. For details, refer to the operating instructions supplied with the receiver. Before you connect the speakers, check the speaker label on the rear panel of the speakers for the speaker type. Connect the speakers as shown in the illustration at right. The front and center speakers and the sub woofer are magnetically shielded to allow it to be installed near a TV set. However, as the surround and surround back speakers are not magnetically shielded, we recommend that you place them slightly further away from a TV set. Notes on HDMI connections The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via a HDMI jack. To output the sound from the supplied speakers and to take advantage of the multi channel surround sound, be sure to - connect the digital audio jacks on the playback component to the receiver. - turn off or mute the TV's volume. Notes • To playback multi channel surround sound through this receiver, you may have to change the digital output setting on the DVD player. For details, refer to the operating instructions supplied with the DVD player. • To fully enjoy surround sound while watching TV programmes, we recommend that you - connect the audio output of your TV to the VIDEO 2 AUDIO IN jack of the receiver. Then, select VIDEO 2 as an input. - turn down or mute the TV's volume. For details on selecting the surround sound, see "Enjoying Surround Sound" in the operating instructions supplied with the receiver. Sony Corporation © 2006 Printed in Malaysia DIGITAL OUT COAXIAL LINE OUT R-AUDIO-L VIDEO HDMI OUT OPTICAL Y PB PR COMPONENT VIDEO OUT S VIDEO OUT DVD player OUTPUT AUDIO OUT L R TV INPUT HDMI INPUT VIDEO Center speaker SS-CNP900 DIGITAL OUT COAXIAL LINE OUT R-AUDIO-L VIDEO HDMI OUT OPTICAL Y PB PR COMPONENT VIDEO OUT S VIDEO OUT HDMI cable Video cord Audio HDMI Video cord cable cord Coaxial digital cord Monaural audio cord DIGITAL OPTICAL VIDEO 1 IN VIDEO 2 IN ANTENNA XM AM DVD IN VIDEO 2 IN ASSIGNABLE HDMI MONITOR OUT COMPONENT VIDEO ASSIGNABLE Y MONITOR PB/CB /B-Y VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT DVD IN PR/CR /R-Y VIDEO 2 MONITOR IN OUT DVD IN COAXIAL L L R IN SA-CD/CD R OUT IN MD/TAPE L L R R AUDIO IN AUDIO IN AUDIO OUT AUDIO IN DVD VIDEO 2 VIDEO 1 L AUDIO CENTER OUT R SUB FRONT SURROUND WOOFER SUB MULTI CH IN WOOFER CENTER + - SPEAKERS L L + - + - R SURROUND SPEAKERS R FRONT A Speaker label Speaker cord RL RL FRONT B SPEAKERS Speaker cord Speaker cord Speaker label INPUT SA-WP780 Sub woofer SS-SRP7000 (SL) Surround speaker (left) SS-SRP7000 (SR) Surround speaker (right) SS-MSP7000 (R) Front speaker (right) SS-MSP7000 (L) Front speaker (left)

  • 1

2-662-964-
01
(1)
DVD player
DVD HOME THEATRE
SYSTEM
HT-7000DH
Speaker Connection
SS-SRP7000
(SR)
Surround speaker
(right)
Coaxial digital cord
Speaker cord
Center speaker
SS-CNP900
SS-SRP7000
(SL)
Surround speaker
(left)
Speaker cord
Speaker label
SA-WP780
Sub woofer
Monaural audio cord
This Speaker Connection explains how to connect the DVD player, TV,
speakers, and sub woofer so you can enjoy multi channel surround sound
from the DVD player. For details, refer to the operating instructions
supplied with the receiver.
Before you connect the speakers, check the speaker label on the rear panel
of the speakers for the speaker type. Connect the speakers as shown in the
illustration at right.
The front and center speakers and the sub woofer are magnetically
shielded to allow it to be installed near a TV set. However, as the
surround and surround back speakers are not magnetically shielded, we
recommend that you place them slightly further away from a TV set.
Notes on HDMI connections
The sound is output from the TV speaker only when a playback component and this
receiver, as well as this receiver and the TV are connected via a HDMI jack. To
output the sound from the supplied speakers and to take advantage of the multi
channel surround sound, be sure to
– connect the digital audio jacks on the playback component to the receiver.
– turn off or mute the TV’s volume.
Notes
To playback multi channel surround sound through this receiver, you may have to
change the digital output setting on the DVD player. For details, refer to the operating
instructions supplied with the DVD player.
To fully enjoy surround sound while watching TV programmes, we recommend that
you
connect the audio output of your TV to the VIDEO 2 AUDIO IN jack of the
receiver. Then, select VIDEO 2 as an input.
turn down or mute the TV’s volume.
For details on selecting the surround sound, see “Enjoying Surround Sound” in the
operating instructions supplied with the receiver.
TV
HDMI
cable
Video cord
Speaker label
CENTER
+
SPEAKERS
R
R
L
L
+
+
DIGITAL
OPTICAL
VIDEO 1
IN
VIDEO 2
IN
COAXIAL
VIDEO 1
MULTI CH IN
FRONT
CENTER
SUB
WOOFER
SURROUND
VIDEO IN
AUDIO IN
MD/TAPE
SA-CD
/
CD
L
R
L
R
L
R
L
R
OUT
IN
IN
AUDIO OUT
DVD
IN
VIDEO 2
IN
MONITOR
OUT
Y
ASSIGNABLE
P
B
/C
B
/B—Y
P
R
/C
R
/R—Y
MONITOR
XM
ANTENNA
AM
SPEAKERS
FRONT B
L
R
L
R
VIDEO IN
DVD
AUDIO IN
L
R
VIDEO OUT
AUDIO
OUT
INPUT
VIDEO
VIDEO
S VIDEO OUT
COMPONENT VIDEO OUT
OPTICAL
COAXIAL
R-AUDIO-L
DIGITAL OUT
LINE OUT
HDMI OUT
P
R
P
B
Y
INPUT
HDMI
INPUT
DVD
IN
SPEAKERS
SURROUND
FRONT A
SUB
WOOFER
VIDEO
S VIDEO OUT
COMPONENT VIDEO OUT
OPTICAL
COAXIAL
R-AUDIO-L
DIGITAL OUT
LINE OUT
P
R
P
B
Y
HDMI OUT
MONITOR OUT
DVD IN
OUTPUT
AUDIO
OUT
L
R
VIDEO 2
AUDIO IN
COMPONENT VIDEO
VIDEO OUT
VIDEO IN
VIDEO 2 IN
ASSIGNABLE
HDMI
SS-MSP7000
(R)
Front speaker
(right)
SS-MSP7000
(L)
Front speaker (left)
HDMI cable
Sony Corporation © 2006
Printed in Malaysia
Video
cord
Speaker cord
Audio
cord