Sony HT-CT180 Operating Instructions - Page 12

Mounting the Bar Speaker on a wall, Hang the Bar Speaker on

Get Sony HT-CT180 PDF manuals and user guides View all Sony HT-CT180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Mounting the Bar Speaker on a wall You can mount the Bar Speaker on a wall. Notes • Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely to two studs in the wall beam. Install the Bar Speaker horizontally, hung by screws in studs in a continuous flat section of the wall. • Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. • Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural calamity, etc. 1 Prepare screws (not supplied) that are suitable for the holes on the rear of the Bar Speaker. 2 Fasten the screws to 2 studs in the wall. The screws should protrude by 8 mm to 9 mm (approx. 11/32 in). 560 mm (22 1/20 in) 8 mm to 9 mm (approx. 11/32 in) 3 Hang the Bar Speaker on the screws. Align the holes at the rear of the Bar Speaker with the screws, then hang the Bar Speaker on the two screws. 4 mm (3/16 in) More than 30 mm (1 3/16 in) 4.6 mm (3/16 in) 9 mm (9/25 in) Hole on the rear of the Bar Speaker 12GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
12
GB
Mounting the Bar
Speaker on a wall
You can mount the Bar Speaker on a
wall.
• Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely to two studs in the wall beam.
Install the Bar Speaker horizontally, hung
by screws in studs in a continuous flat
section of the wall.
• Be sure to subcontract the installation to
Sony dealers or licensed contractors and
pay special attention to safety during the
installation.
• Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
1
Prepare screws (not supplied) that
are suitable for the holes on the
rear of the Bar Speaker.
2
Fasten the screws to 2 studs in the
wall.
The screws should protrude by
8 mm to 9 mm (approx.
11
/
32
in).
3
Hang the Bar Speaker on the
screws.
Align the holes at the rear of the Bar
Speaker with the screws, then hang
the Bar Speaker on the two screws.
Notes
4 mm (
3
/
16
in)
More than 30 mm (1
3
/
16
in)
4.6 mm
(
3
/
16
in)
Hole on the rear of the Bar Speaker
9 mm
(
9
/
25
in)
560 mm
(22
1
/
20
in)
8 mm to
9 mm
(approx.
11
/
32
in)