Sony HT-CT260 Operating Instructions - Page 40
Specifications, Press, to turn on the power., while pressing INPUT, and VOL - on the Sound Bar. - sound bar problems
View all Sony HT-CT260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
The remote control does not function • Point the remote control at the remote control sensor on the system. • Remove any obstacles in the path between the remote control and the system. • Replace both batteries in the remote control with new ones, if they are weak. • Make sure you select the correct input on the remote control. OTHER If ?/1 indicator on the subwoofer flash in red. Press ?/1 on the subwoofer to turn it off, and check the following item. • Is anything blocking the ventilation holes of the system? If "PROTECT" appears on the front panel display. Press ?/1 to turn off the system, and check the following item after "STANDBY" disappears. • Is anything blocking the ventilation holes of the system? If the system still does not operate properly after performing the above measures, reset the system as follows: Use buttons on the system for the operation. 1 Press ?/1 to turn on the power. 2 Press ?/1 while pressing INPUT and VOL - on the Sound Bar. "RESET" appears and the system is reset. AMP menu, sound field, etc., return to the default settings. After checking the above item and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking the above item, consult your nearest Sony dealer. Specifications Formats supported by this system Digital input formats supported by this system are as follows. Format Supported/Not supported Dolby Digital a DTS a Linear PCM 2ch 48 kHz a or less 40US