Sony HT-DDW650 Operating Instructions (HT-DDW650) - Page 34
Changing the command, mode of the receiver
![]() |
View all Sony HT-DDW650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Changing the command mode of the receiver This function is useful when you use 2 Sony receivers in the same room. 1 Turn off the receiver. 2 Hold down ENTER and press 1/u to turn on the receiver. "C.MODE.AVX" appears in the display. Each time you repeat the procedure above, the display changes as follows: C.MODE.AV1 y C.MODE.AV2 Tip The initial setting is "C.MODE.AV2". Notes • The command mode of the supplied remote is "AV2" and you cannot change this setting. • If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. 34US
![](/manual_guide/products/sony-strk650p-operating-instructions-htddw650-bb703f5/34.png)
34
US
Changing the command
mode of the receiver
This function is useful when you use 2 Sony
receivers in the same room.
1
Turn off the receiver.
2
Hold down ENTER and press
1/u
to
turn on the receiver.
“C.MODE.AVX” appears in the display.
Each time you repeat the procedure above,
the display changes as follows:
C.MODE.AV1
y
C.MODE.AV2
Tip
The initial setting is “C.MODE.AV2”.
Notes
•
The command mode of the supplied remote is
“AV2” and you cannot change this setting.
•
If the command mode of the receiver and the
remote is different, you cannot use the remote to
operate the receiver.