Sony HT-NT3 Operating Instructions - Page 17
Connecting with a wireless network, Setting up a wireless LAN, connection
View all Sony HT-NT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Network Function Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then press . Connecting with a wireless network Setting up a wireless LAN connection Before performing network settings When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the network settings with the WPS button. If not, you will be required to select or enter the following information. Check the following information in advance. The network name (SSID)* of the wireless LAN router/access point The security key (password)** for the network * SSID (Service Set Identifier) is a name that identifies a particular access point. ** This information should be available from a label on your wireless LAN router/access point, from the operating instructions, from the person who set up your wireless network, or from the information provided by your Internet service provider. 1 Follow Steps 1 to 4 of "Setting up a wired LAN connection" (page 16). 2 Press / to select [Wireless Setup(built-in)], then press . A list of available SSIDs (access points) appears on the TV screen. 3 Press / to select the network name (SSID) you want, then press . The security setting display appears on the TV screen. 4 Enter the security key (WEP key, WPA/WPA2 key) using the software keyboard. Use and to select the characters/ numbers, then select [Enter] to confirm the security key. The system starts connecting to the network. For details, refer to the messages that appear on the TV screen. If using a fixed IP address Select [New connection registration] in step 3, select [Manual registration], then follow the on-screen instructions to select [Specify IP address]. The IP address input display appears on the TV screen. Follow the on-screen instructions to enter the value for [IP Address], then press to confirm the values. Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then press . Note The security setting display in step 4 does not appear if your network has not been secured by encryption (using the security key). 17US